Elevator History Essay, Research Paper
An elevator is a mechanism for moving people and freight from level to level in a building
or any other structure. The first elevator-like structure was built in 236 BC by the
Archimeds. This construction was a hoist operated by ropes and pulleys. However, the
first pragmatic elevator was not developed until the 19th century. Though sensible, this
elevator has been modified many times throughout the course of history and is still
updated with all of the new advancements in math and technology. From the start of the
production of elevators through today, there have been numerous and boundless
improvements made on their structure and how they operate: all due to the advancement
of mathematics and technology.
The first elevator developed was known as a manual elevator. This system of
elevators used relay logic . Relay logic was a simple wiring based on circuits. This type
of elevator did not transfer people from one level to another, only cargo.
The second type of elevators was developed in the 1800s. These elevators were
powered by steam. At first, these elevators were used solely to transport freight in
factories and ore in mines. Unfortunately, these elevators required a safety device to
restrain the elevator from dropping if it s supporting cable broke, and this had not been
invented yet. Eventually, this necessity was discerned and acted upon. In 1852, Elisha
Graves Otis designed the first safety contrivance for elevators. This device was a system
involving spring-operated cams that affianced the guide rails in the elevator shaft when the
cable broke. This secured the elevator from subsiding which enabled steam powered
elevators to be used for transporting people along with cargo. This new use was caused
by the precautions taken in improving the safety of steam powered elevators. It was first
used for people in 1857 in New York s own Haughwout department store. This edifice
was driven by steam power: unlike the manual elevator it had the capability of transporting
people from floor to floor. Though this was a major amplification in the manufacturing of
elevators, technology and mathematics were still improving allowing for even more types
of ameliorated elevators to take the place of those already produced.
As mathematics advanced, the third type of elevators was formulated. This being
the hydraulic elevator was the first practical elevator with semblance to those of today s
time. The concept of hydraulics is somewhat based on Pascal s Law. This stated that
pressure exerted upon a liquid is transmitted in all directions at the same magnitude. This
was theorized sometime in the mid-17th century yet it s capability of advancing and
explaining technology was not fully accredited until the 19th century when hydraulic
elevators were first introduced. Hydraulic elevators were used between 1857 and 1889.
Operated by means of a vertical plunger, this elevator traveled up and down a cylinder
pushing and lowering the car above it. The vertical plunger was reallocated by liquid
under pressure. A hand-driven pump (hydraulic jack) created this pressure. The basic
idea behind any hydraulic system is extraordinarily simple. Any force that is applied at one
point is moved to another point using an incompressible fluid (either oil or water) while
the force is frequently multiplied in the process. The fluid used was most often oil. Oil
was preferred over water because of its shielding and lubricating behavior, and in the case
of mineral oil, its low coherence. Though the popular use of hydraulic elevators ended in
1889, they are still used in prewar buildings. Furthermore, they are presently utilized in
carrying certain heavy masses.
Electrically driven elevators were devised before their initial commercial
application in 1889. This presentation took place in one of New York s finest buildings,
the Demarest. For the first time in all history, an electrically driven elevator was installed
for the utilization of the public. This genre of elevator was operated by an electric motor.
This motor drove a winding drum in the basement of the building. Following this,
significant advancements came about in 1894 and then another in 1895. First, in 1894,
push-button controls were introduced. Like modern elevators, this invention suffered
people to simply push the button of the floor they were going to instead of having to use a
lever to determine the floor (by pushing it left or right for down and the opposite for up).
The second invention (1895) was that of a hoisting apparatus. This device was
ascertained in England. It s purport was to make the move of the cable drum to the top of
the shaft possible, thus leading to higher shafts in taller buildings. This mechanism applied
electric power to a pulley at the top of the shaft. This caused the weight of the car and
counterweights to ensure traction; making its original purpose conceivable. This
progression, along with that of the push-button controls were key introductory elements
for many fabrications to come.
In 1915, eleven years after the push-button controls, the first automatic system of
controlling the elevator s destination was applied. This system was called automatic car
leveling. In this system, the control took over at each floor enabling the elevator to stop
uniformly with the floor level. Soon after, the elevator doors also evolved. Their
upgrading was due to an automatic system as well. However instead of regulating where
the elevator would cease its ascent or descent, this automatic system ingenuously
controlled the opening and closing of the elevator doors at its predetermined floor. With
all of these preferments, elevator manufactures wanted to find a way of taking up less
space while still taking advantage of all that has been accomplished throughout time.
In an attempt to minimize the space taken by elevator shafts in a building, the
double-deck elevator was constructed in 1932. Although this advancement was
innovative and deserving of application, the double-deck elevator was not used extensively
until 1971. This elevator s famous comeback was its installation into Chicago s salient
Time-Life building (1971). By this time, elevators had vastly ameliorated, but
there was still room for improvement.
The next and most recent type of elevator was developed in the 20th century. The
term invariably associated with this elevator is automatic , hence its name (Automatic
Elevator). With this elevator came the introduction of a system called the solid state.
This system works through computer chips that are based on mathematics. The cable
hoisted automatic elevators used today travel up and down in a shaft. On each floor, the
shafts have doors that open within. Above the elevator shaft is a particularly significant
room that controls most of the elevator s function. This room embodies an electric motor
which administrates the important duties of an elevator. This motor controls speed,
stopping, starting, and reversing. The steel cables that uphold the car are looped around a
drum appended to the driving motor. As the capacity in the car increases, the grip that the
cables have on the drum become more taut. The majority of present-day elevators possess
both inner and outer doors. To further the safety of these elevators, they will operate only
if both sets of doors are shut. In nearly all buildings, elevators contain photoelectric
inclinations. These devices are used to keep the doors from closing while passengers are
entering and exiting. These elevators are used all over the world and have proved
themselves to be a phenomenal upgrade in the elevator industry.
From being operated by a manual or steam-powered device, to being lifted by
cables, elevators have proved in their own advancements the notable progress of math and
technology. Based on the facts previously stated, one can observe that elevators have
come impressively far since the idea of a construction to move people and things from one
level to another came about. In a mere 250 years, people have gone from physically
walking up a staircase to being lifted by a mechanical apparatus. Year after year, systems
have been technologically and mathematically amended to produce today s automatic
elevator. With each improvement, whether slight or immense, elevators have become
safer, easier to operate, and quicker. If the present-day elevator was taken apart and
compared to the first (or second) type of elevator, it would be evident what the
progression of mathematics and technology have allowed us to accomplish.
! |
Как писать рефераты Практические рекомендации по написанию студенческих рефератов. |
! | План реферата Краткий список разделов, отражающий структура и порядок работы над будующим рефератом. |
! | Введение реферата Вводная часть работы, в которой отражается цель и обозначается список задач. |
! | Заключение реферата В заключении подводятся итоги, описывается была ли достигнута поставленная цель, каковы результаты. |
! | Оформление рефератов Методические рекомендации по грамотному оформлению работы по ГОСТ. |
→ | Виды рефератов Какими бывают рефераты по своему назначению и структуре. |
Реферат | "Он-лайн"-технології в підготовці вчителя з загально-технічних дисциплін |
Реферат | MMX-технологии |
Реферат | Excel - финансовый контроль и планирование |
Реферат | Чип-карты |
Реферат | MS Excel |
Реферат | "Интегральные микросхемы (аналоговые и импульсные), как одна из составляющих частей РЭА" |
Реферат | A Comparison Of Night Walker And Roselily |
Реферат | SELECT |
Реферат | NetGear |
Реферат | §®§Ъ§Ь§в§а§п§Э§Ц§Ь§д§в§а§Я§Ъ§Ь§С |
Реферат | AWARD Setup BIOS |
Реферат | Системы телекоммуникаций и информация |
Реферат | On-line распознавание рукописных символов |
Реферат | Религия Китая Даосизм |
Реферат | Маркетинг 4 |