Titanium Essay, Research Paper
The Reverend William Gregor in 1791, who was interested in minerals, discovered titanium. He recognized the presence of a new element, now known as titanium, in menachanite, a mineral named after Menaccan in Cornwall (England). Several years later, the element was rediscovered in the ore rutile by a German chemist, Klaproth.
The pure elemental metal was not made until 1910 by Matthew A. Hunter, who heated TiCl4 together with sodium in a steel bomb at 700-800?C.
Titanium is used for alloys with aluminum, molybdenum, manganese, iron, and other metals. These alloys of titanium are used principally in the aerospace industry, for both airframes and engines, where lightweight strength and ability to withstand extremes of temperature are important. Titanium is as strong as steel, but much lighter. It is twice as strong as aluminum. It is nearly as resistant to corrosion as platinum. Titanium is a component of joint replacement parts, including hip ball and sockets.
It has excellent resistance to seawater and is used for propeller shafts, rigging, and other parts of ships exposed to salt water. A titanium anode coated with platinum provides cathodic protection from corrosion by salt water. Titanium paint is an excellent reflector of infrared radiation, and is extensively used in solar observatories where heat causes poor viewing conditions.
Pure titanium dioxide is relatively clear and has an extremely high index of refraction with an optical dispersion higher than diamond. It is produced artificially for use as a gemstone, but it is relatively soft. Star sapphires and rubies exhibit their asterism as a result of the presence of TiO2. The dioxide is used extensively for paint as it is permanent and has good covering power. Titanium oxide pigment accounts for the largest use of the element.
Titanium, symbol Ti, silver-white metallic element with an atomic number of 22 and an atomic weight of 47.9. Titanium is one of the transition elements of the periodic table. Pure titanium metal is extremely brittle when cold but malleable and ductile at a low red heat. Titanium is never found in the pure state.
Because of its strength and light weight, titanium is used in alloys and as a substitute for aluminum. Alloyed with aluminum and vanadium, titanium is used in aircraft for fire walls, outer skin, landing-gear components, hydraulic tubing, and engine supports. Titanium is also widely used in missiles and space capsules. The Mercury, Gemini, and Apollo capsules were largely made of titanium.
The chemical inertness of titanium makes it suitable as a replacement for bone and cartilage in surgery and as a pipe and tank lining in food processing. It is used in desalinization plants because of its ability to withstand saltwater corrosion. Titanium dioxide, known as titanium white, is a brilliant white pigment used in paints, lacquers, plastics, paper, textiles, and rubber.
Pure titanium is soluble in concentrated acids, such as sulfuric and hydrofluoric acids, and insoluble in water. The metal is extremely brittle when cold, but is readily malleable and ductile at a low red heat. Titanium melts at about 1660? C (about 3020? F), boils at about 3287? C (about 5949? F), and has a specific gravity of 4.5. The atomic weight of titanium is 47.88.
! |
Как писать рефераты Практические рекомендации по написанию студенческих рефератов. |
! | План реферата Краткий список разделов, отражающий структура и порядок работы над будующим рефератом. |
! | Введение реферата Вводная часть работы, в которой отражается цель и обозначается список задач. |
! | Заключение реферата В заключении подводятся итоги, описывается была ли достигнута поставленная цель, каковы результаты. |
! | Оформление рефератов Методические рекомендации по грамотному оформлению работы по ГОСТ. |
→ | Виды рефератов Какими бывают рефераты по своему назначению и структуре. |